When the stove stops working, dinner doesn't wait. AMPM doesn't either.
Click Here to Call (888) 910-4766A stove that doesn't work disrupts every meal until it's fixed. In a Stoughton, WI household running a daily routine, a burner that won't ignite or an oven that can't hold temperature isn't a background inconvenience — it changes how the evening runs. AMPM Service Appliance Repair handles stove faults across every configuration and every major brand, with the same flexible scheduling that defines the rest of our service. Need a technician after work? On a Saturday? AMPM finds a time that works.
Six months ago: One front burner on the gas range started igniting on the second or third click instead of the first. You noticed, adjusted around it, and moved on. It wasn't worth the disruption of booking a repair.
Three months ago: The same burner now clicks five or six times before catching. The oven has started taking longer to come to temperature than it used to. You've been adjusting recipes. Still not urgent enough to book.
This evening: The front burner doesn't ignite at all. The oven is 40 degrees cool. You're cooking on two working burners and the dinner is late. The stove that was "mostly working" for six months has stopped working.
The repair that was a single igniter switch six months ago is now an igniter, a thermostat sensor, and a spark module assessment. Three separate issues, each of which had an early-signal version. In Stoughton, WI, AMPM schedules stove repairs before they reach this point — because the extended scheduling means the booking doesn't have to wait for a convenient week that never quite arrives.
Spark module testing, igniter switch assessment, gas valve inspection, and burner port evaluation. All gas stove faults diagnosed sequentially before any component is replaced.
Burner element testing, infinite switch diagnostics, and control board assessment. Elements and switches stocked for the most common residential configurations.
Igniter glow bar testing, gas valve assessment, thermostat calibration, and safety valve inspection. Every gas oven job includes a full preheat cycle confirmed to temperature.
Bake and broil element testing, cycling thermostat assessment, door seal inspection, and control board diagnostics. Temperature verified with a reference thermometer on every oven repair.
Consistent over- or under-temperature assessed and corrected through sensor replacement or offset calibration.
Surface crack assessment, subsurface element testing, and panel replacement for Samsung, GE, Whirlpool, Frigidaire, and other brands.
Combined cooktop and oven system diagnostics in a single visit for freestanding and slide-in gas ranges.
Gas line confirmation, anti-tip fitting, levelling, and full operational testing before the installation closes.
A gas stove with a moisture-damaged igniter switch doesn't improve with use. Repeated ignition attempts — each of which releases gas briefly before the spark fires — introduce more moisture into the igniter circuit as steam from cooking accumulates. The switch that needed two clicks last month needs five this month. The burner port that was slightly clogged with residue narrows further as cooking debris accumulates around the irregular ignition. A stove fault that's been developing for weeks is closer to failure than it was when the first symptom appeared, and using the stove accelerates the progression. In Stoughton, WI, AMPM's evening and weekend availability means the repair doesn't have to wait for a weekday morning opening. The stove that's still usable now can be repaired while it still is — not after it isn't.
Every burner on the stove gets tested — not just the one that triggered the call. A stove with one dead burner frequently has a second one approaching failure, and finding it during the same visit saves a second call in four weeks.
The oven gets a temperature check with a reference thermometer on any job where the oven is relevant to the reported fault — or where the homeowner mentions it seems off. A oven running 30 degrees cool gets flagged and quoted at the same visit, not discovered on a separate call next month.
Gas connections and valve operation are confirmed on every gas stove and range job. Not as a safety theatre gesture — as a standard part of completing the job correctly.
The installation surface gets a levelness check on every stove installation and on any replacement job. An unlevel range affects oven temperature distribution and accelerates wear on the door hinge.
There's a common cleaning habit that's responsible for a significant percentage of gas stove igniter problems AMPM diagnoses in Stoughton, WI: cleaning the stovetop with excess water while the burner caps are still in place.
When water gets into the burner cap or the igniter well during cleaning, it can bridge the contacts on the igniter switch — the component that signals the spark module to fire. Bridged contacts cause the igniter to click continuously, even with the knob off. More problematically, repeated water exposure corrodes the switch contacts over time, degrading the signal quality and eventually causing the intermittent ignition that homeowners notice as "it takes a few clicks to light."
The prevention: clean the stovetop surface only. Remove the burner caps and grates before cleaning, set them aside, and clean the surface underneath separately. Never spray cleaner or water directly into the igniter wells or burner ports. For the burner caps themselves, wash them by hand in a sink with warm soapy water and allow them to dry completely — ideally an hour or more — before replacing them.
If the continuous clicking has already started, try drying the igniter area thoroughly with a cloth and allowing 30 minutes for residual moisture to evaporate before testing again. If the clicking continues after drying, or if ignition is intermittent rather than consistent, the igniter switch itself has likely been damaged and needs replacing. AMPM carries igniter switches for all major gas stove brands and handles this repair in a single visit — at a time that actually fits your schedule.
"Three burners on my gas range had been getting progressively worse for two months. I finally booked an evening appointment with AMPM — 6pm worked perfectly. Technician tested every burner, found two failed spark modules and one moisture-damaged igniter switch, had all parts on the vehicle, and fixed all three in one visit. Every burner lights first click now."
— Brenda C., Stoughton"Electric oven had been running cool for weeks and I'd been compensating. AMPM booked me for a Saturday morning, arrived on time, found the thermostat sensor was drifting significantly, replaced it, and checked the temperature with their own thermometer before leaving. First time I've followed a recipe without adjusting it in months."
— Keith N., Stoughton"I was told by another service the control board on my Samsung range had probably failed — expensive repair. AMPM diagnosed it as a failed bake element with a secondary igniter issue. Two separate faults, neither of which was the control board. Repaired both same visit, cost a fraction of the control board quote."
— Julie O., StoughtonAMPM Service Appliance Repair serves Stoughton, WI with stove and oven repairs on a schedule that fits your household. Don't wait until the stove fully fails — book a slot today and have it fixed while it's still partly working.
Click Here to Call (888) 910-4766